Hardware Controller Clear and Show Commands
Example
The following example resets GigabitEthernet port 1, sub‐interface 5:
XSR#clear counters gigabitethernet 1.5
clear counters serial
This command clears serial interface counters. The counters cleared are:
•
ifInOctets
•
ifInUcastPkts
•
ifInNUcastPkts
•
ifInDiscards
•
ifInErrors
•
ifOutOctets
•
ifOutUcastPkts
•
ifOutNUcastPkts
•
ifOutDiscards
•
ifOutErrors
•
ifInUnknownProtos
Syntax
clear counters serial [card / port]
card
port
Mode
Privileged EXEC:
Example
XSR#clear counters serial 1/0
clear interface serial
This command resets the hardware logic on a serial interface.
4-94 Configuring Hardware Controllers
XSR card number.
XSR port number.
XSR#
Note: Issuing this command will cause the interface to drop its link, any packets that it may have
received, and any packets that may be in the process of being transmitted, while it resets.