Hardware Controller Clear And Show Commands - Enterasys X-Pedition XSR CLI Cli Reference Manual

Hardware Controller Clear and Show Commands

Hardware Controller Clear and Show Commands
clear counters fastethernet
This command clears MIB‐II counters for the FastEthernet interface. The counters cleared include:
• ifInOctets
• ifInUcastPkts
• ifInNUcastPkts
• ifInDiscards
• ifInErrors
• ifOutOctets
• ifOutUcastPkts
• ifOutNUcastPkts
• ifOutDiscards
• ifOutErrors
• ifInUnknownProtos
Syntax
clear counters fastethernet interface sub-interface
interface
sub-interface
Mode
Privileged EXEC:
Example
The following example clears the MIB‐II counters on FastEthernet port 1, sub‐interface 20:
XSR#clear counters fastethernet 1.20
clear counters gigabitethernet
This command clears the same MIB‐II counters for the interface as the
fastethernet
Syntax
clear counters gigabitethernet interface sub-interface
interface
sub-interface
4-92 Configuring Hardware Controllers
FastEthernet interface number, ranging from 1 to 2.
FastEthernet sub‐interface number, ranging from 1 to 64.
XSR#
command.
Interface number, ranging from 1 to 3.
Sub‐interface number, ranging from 1 to 64.
clear counters