Ip Ssh Server - Enterasys X-Pedition XSR CLI Cli Reference Manual

General Network Management Commands
Syntax
ip http server [enable | disable]
enable
disable
Syntax of the "no" Form
The no form of this command disables the HTTP server:
no ip http server
Mode
Global configuration:
Default
Disable
Examples
XSR(config)#ip http server enable
XSR(config)#no ip http server

ip ssh server

This command enables/disables Secure Shell (SSH) service to the client. Because the SSH server is
enabled at boot‐up, you can either manually disable the SSH server using CLI, or disable the SSH
server in the startup‐config file. If the optional parameter is not supplied, the SSH server will be
enabled.
Syntax
ip ssh server [enable | disable]
enable
disable
Syntax of the "no" Form
The no form of this command disables the SSH server:
no ip ssh server
Mode
Global configuration:
Defaults
• Enabled
1-6 Network Management
Enables HTTP server.
Disables HTTP server.
XSR(config)#
Enables SSH server.
Disables SSH server.
XSR(config)#