Match Ip Address - Enterasys X-Pedition XSR CLI Cli Reference Manual

match ip address

This command associates the PBR policy with a configured Access Control List (ACL).
Syntax
match ip address access-number
access-number
Syntax of the "no" Form
The no command deletes the specified ACL match clause:
no match ip address access-number
Mode
PBR Map configuration:
Example
In the following example, ACL 101 is used to match the traffic:
XSR(config-pbr-map)#match ip address 101
set ip next-hop
This command specifies a next‐hop IP address as the forwarding router for Policy Based Routing.
Syntax
set ip next-hop ip-address
ipaddress
Syntax of the "no" Form
The no command deletes the specified set clause:
no set ip next-hope ip-address
Mode
PBR Map configuration:
Example
In the following example, 192.168.27.1 is set as the next‐hop router:
XSR(config-pbr-map)#set ip next-hop 192.168.27.1
The ACL number used to match traffic.
XSR(config-pbr-map)#
IP address of the next hop.
XSR(config-pbr-map)#
Policy-Based Routing Commands
XSR CLI Reference Guide 5-147