Syntax
cmv save file-name
file-name
Mode
ATM Interface configuration:
Example
The following example saves the CMV training list to file retrain‐list:
XSR(config-if<ATM0/1/1>)#cmv save retrain-list
Save complete
XSR(config-if<ATM0/1/1>)#
Other ADSL Commands
description
This command adds a description string to an existing ATM interface object.
This command requires that the ADSL NIM be installed and the DSP firmware file be present in
the
Flash:
Syntax
description description_text
description_text
Syntax of the "no" Form
The no form of this command sets the description text to an empty string:
no description
Mode
ATM Interface configuration:
Example
The following example adds ADSL Line to the interface object:
XSR(config-if<ATM0/1/1>)#description "ADSL Line"
The name of the file used to save the CMV training list.
XSR(config-if<ATMxx>)#
directory.
A text string that describes the interface object. Text with embedded
spaces must be enclosed in double quotes. Omitting the description text
results in an empty description string.
XSR(config-if<ATMxx>)#
Other ADSL Commands
XSR CLI Reference Guide 13-87