Observing Syntax and Conventions
The CLI Syntax and conventions use the notation described in the following table.
Convention
xyz
[x]
[x | y | z]
{x | y | z}
[x {y | z}]
(config-if<xx>)
Next Mode entries display the CLI prompt after a command is entered.
Sub‐command headings are displayed in red text.
soho.enterasys.com
QoS Commands
The following set of commands configure Quality of Service (QoS) values for the XSR:
•
"Policy‐Map Commands" on page 12‐84.
•
"Class‐map Commands" on page 12‐101.
•
"QoS Show Commands" on page 12‐105.
Configuring Quality of Service
Description
Key word or mandatory parameters (bold)
[ ] Square brackets indicate an optional parameter (italic)
[ | ] Square brackets with vertical bar indicate a choice of values
{ | } Braces with vertical bar indicate a choice of a required value
[{ | } ] Combination of square brackets with braces and vertical bars
indicates a required choice of an optional parameter
xx signifies the interface, class map, policy map or other value you
F1
G3
S2/1.0
specify; e.g.,
,
,
and
G
a GigabitEthernet interface.
Italicized, non-syntactic text indicates either a user-specified entry or text with
special emphasis
<Your Name>
F
,
.
indicates a FastEthernet,
XSR CLI Reference Guide 12-83
12