Table of Contents
Advertisement
AS external
Subtotal
Delete
Maxage
Total
show ip ospf interface
This command displays interface OSPF‐related information, including network type, priority,
cost, hello, interval, dead interval.
Syntax
show ip ospf interface [type][number]
type
number
Mode
EXEC or Global configuration:
Sample Output
The following are sample responses:
XSR>show ip ospf interface
FastEthernet1 is UP
Internet Address
Internet Address
Internet Address
Area 0.0.0.2
Router ID 51.51.51.1,Network Type BROADCAST,Cost: 10
Transmit Delay is 1 sec,State DR,Priority 1
Designated Router id 51.51.51.1, Interface addr 51.51.51.1
No backup designated router on this network
Timer intervals configured, Hello 10,Dead 40,Wait 40,Retransmit 5
No Hellos (Passive Interface)
Neighbor Count is 0, Adjacent neighbor count is 0
Parameter Descriptions
Internet address
Area
Router ID
No Hellos (Passive
Interface)
Sum of external LS records.
Subtotal Sum of LS records per area.
Sum of LS records waiting for deletion from LS DB.
Sum of LS records that have reached maximum age.
Sum of LS records in the LS database on XSR.
Interface type. Valid interface types are interfaces that exist on this router.
Interface number. Valid values correspond to the number of a particular
interface type present on this router.
XSR>
XSR(config)#
or
51.51.51.1
Mask
52.52.52.1
Mask
53.53.53.1
Mask
IP address and mask assigned to this interface.
OSPF area to which this interface is assigned.
OSPF router ID. OSPF selects the Router ID from one of the IP
addresses configured on this router.
OSPF Hellos are not sent or received on this interface.
255.255.255.0
255.255.255.0 secondary
255.255.255.0 secondary
OSPF Debug and Show Commands
XSR CLI Reference Guide 5-119
Advertisement
Table of Contents
