Table of Contents
Advertisement
Example
XSR#show dialer 1
Sample Output
The following is sample output from the
#show dialer 5
Dialer5
Dialer state is: UP
Wait for carrier default: 60, default retry: 3
Dial String
3200
Dialer pool 23
(Serial 2/0:0, )
Parameter Descriptions
Dialer1
Wait for carrier(30 secs) Seconds to wait for carrier signal.
Default retry
Dial String
Successes
Failures
Map Class
Dialer pool 2, priority 0
Serial0
show dialer maps
This command displays dialer policies.
Syntax
show dialer maps
Mode
EXEC:
Sample Output
The following is sample output from the
Dialer maps configured on Interface <Dialer1>:
Next hop IP address: <10.10.10.2>
Remote host: <robo2>
Map class: <isdn>
Success Failures
2
Name of the dialer interface.
Number of default call retries.
Dial strings to used to make calls.
Number of successful connections.
Failed Connections.
Name of associated map class.
Indicates that this interface is a member of dialer pool 2 with a priority
of 0 in that pool.
Type of interface.
XSR#
show dialer
Map Class
0
show dialer maps
Dialer Interface Clear and Show Commands
command for a dialer interface:
command:
XSR CLI Reference Guide 10-91
Advertisement
Table of Contents
