show ip traffic
This command displays general IP protocols statistics.
Syntax
show ip traffic
Mode
EXEC or Global configuration:
Sample Output
The following is sample output:
XSR>show ip traffic
IP statistics:
Rcvd:
Frags:
Bcast:
Sent:
ICMP statistics:
Rcvd:
Sent:
UDP statistics:
Rcvd:
Sent:
TCP statistics:
Rcvd:
Sent:
RIP statistics:
Rcvd:
Sent:
OSPF statistics:
Rcvd:
XSR>
9040 total, 919 local destination, 7020 to be forwarded
5 header errors, 45 IP destination not valid
63 unknown protocol, 0 discards
30 fragments, 10 reassembled, 0 couldn't reassemble
5 fragmented, 15 fragments, 0 couldn't fragment
87 received, 97 sent
192 generated,0 drop no route, 0 discards
0 drop no route, 0 discards
44 total
0 format errors, 0 checksum errors, 0 redirects, 0 unreachable
2 echo, 2 echo reply, 0 mask requests, 0 mask replies, 0 quench
0 parameter, 0 timestamp, 0 info replies, 0 time exceeded
23 total
0 redirects, 23 unreachable, 0 echo, 0 echo reply
0 mask requests, 0 mask replies, 0 quench, 0 timestamp
0 info reply, 0 time exceeded, 0 parameter problem
82858 total, 0 checksum errors, 82852 no port
42 total, 0 forwarded broadcasts
9138 total, 0 checksum errors, 0 no port
12425 total
0 total, 0 checksum errors
0 resp to a query, 0 regular updates, 0 resp triggered by a change
0 total
0 total, 0 checksum errors
0 hello, 0 database desc, 0 link state req
or
XSR(config)#
IP Clear and Show Commands
XSR CLI Reference Guide 5-177