Set System Login; Clear System Login - Enterasys D2 D2G124-12P Cli Reference Manual

set system login

set system login
Use this command to create a new user login account, or to disable or enable an existing account.
The D‐Series switch supports up to 16 user accounts, including the admin account, which cannot
be deleted.
Syntax
set system login username {super-user | read-write | read-only} {enable | disable}
Parameters
username
super‐user |
read‐write |
read‐only
enable | disable
Defaults
None.
Mode
Switch command, super user.
Example
This example shows how to enable a new user account with the login name "netops" with super
user access privileges:
D2(su)->set system login netops super-user enable

clear system login

Use this command to remove a local login user account.
Syntax
clear system login username
Parameters
username
Defaults
None.
Mode
Switch command, super user.
2-4 Basic Configuration
Specifies a login name for a new or existing user. This string can be a
maximum of 80 characters, although a maximum of 16 characters is
recommended for proper viewing in the show system login display.
Specifies the access privileges for this user.
Enables or disables the user account.
Specifies the login name of the account to be cleared.
Note: The default admin (su) account cannot be deleted.