Table of Contents
Advertisement
in fragments with unexpected
B bit set
out interleaved packets
show frame-relay lmi
This command displays Local Management Interface (LMI) statistics. Enter the command without
arguments to obtain statistics about all Frame Relay interfaces.
Syntax
show frame-relay lmi [interface] [interface-num]
interface
-num
Mode
EXEC or Global configuration:
Sample Output
The following example displays output on Serial interface 2/0 from an XSR with a Serial NIM
installed:
XSR#show frame-relay lmi
LMI Statistics for Serial 2/0 (Frame Relay DTE)
Interface = INACTIVE
local sequence number
# PVCs reported by LMI = 0
Down DLCIs:
16, 18
The following example displays output on Serial interface 2/0:1 from an XSR with a T1/E1 Serial
controller NIM installed:
LMI Statistics for Serial 0/2/0:1 (Frame Relay DTE)
Interface = down
local sequence number
# PVCs reported by LMI = 0
Sum of fragments received by this DLCI that have an unexpected B (Begin) bit set.
When this occurs, all fragments being reassembled are dropped and a new frame is
begun with this fragment.
Sum of packets leaving this DLCI that have been interleaved between segments.
The interface or sub‐interface number of the Frame Relayport or sub‐interface
affec ted by this command. If interface serial interface‐num is not specified, then
this command applies to all Frame Relay ports. If interface‐num specifies a sub‐
interface, then only DLCIs in that particular sub‐interface may be cleared. If
interface‐num calls for a port, then all DLCIs on the Frame Relay interface will be
cleared.
Status Enq. Sent = 0
Status Timeout = 0
# configured PVCs = 2
Status Enq. Sent = 0
Status Timeout = 0
# configured PVCs = 1
XSR>
XSR(config)#
or
Updated Status Rcvd = 0
Invalid L2 LMI info = 0
= 127
net sequence number = 127
Invalid L3 LMI Info = 0
Updated Status Rcvd = 0
Invalid L2 LMI info = 0
= 127
net sequence number = 127
Invalid L3 LMI Info = 0
Frame Relay Clear and Show Commands
LMI = AUTO (AUTO)
Status Msg. Rcvd = 0
LMI = NONE
Status Msg. Rcvd = 0
XSR CLI Reference Guide 9-105
Advertisement
Table of Contents
