Enterasys X-Pedition XSR CLI Cli Reference Manual page 116

File System Commands
Configuration Load
This example loads startup‐config via the network from a TFTP server. The XSR does not load the
configuration from the network automatically.
XSR#copy tftp:TFTP1/tftpfiles/tftpimage flash:startup-config
Save Running Configuration
To save configuration changes into non‐volatile memory, the running configuration must be
copied into startup configuration:
XSR#copy running-config startup-config
copy running-config startup-config
This command copies the running configuration to the startup configuration file which is stored in
non‐volatile memory. It initiates a script requiring confirmation of your intention.
Syntax
copy running-config startup-config
Mode
Privileged EXEC:
Example
XSR#copy running-config startup-config
Sample Output
XSR#copy running-config startup-config
Copy 'running-config'
as 'startup-config' into flash: device (y/n) ? y
Running-config saved to startup-config.
<186>Sep 23 16:02:08 10.10.10.20 CLI: Running-config saved to startup-config by
user admin
copy startup-config tftp
This command saves the startup configuration on a TFTP server via the network connection. It
initiates a script requiring confirmation of your intention.
Syntax
copy startup-config tftp:[[[//location]/directory]/filename
location
directory
filename
3-110 Configuring the XSR Platform
XSR#
IP address of the TFTP server on the network.
Name of the TFTP directory.
Name of the TFTP file.
]