Show Hostdos - Enterasys X-Pedition XSR CLI Cli Reference Manual

Security Clear and Show Commands
show access-list log-update-threshold
This command displays ACL log information. It is processed as follows:
• A packet with a fresh source IP address on the ACL group is reported immediately. Data is
cached to keep track of the occurrence happening again in the near future.
• All other arrivals of the packet with existing source IP address data on that ACL group will
increment the number of packets and, after five minutes, log an alarm with the sum of packets
gathered in the last five minutes. The count will reset after the alarm is logged.
• For enabled threshold data, if the count matches the threshold then the alarm is logged and
the count reset. Other packets received after the threshold is met will increment the count
until the next threshold is met or five minutes have elapsed.
Syntax
show access-list log-update-threshold
Mode
Privileged EXEC or Global configuration:
Sample Output
The following example displays a sample ACL log:
XSR#show access-list log-update-threshold
access-list log-update-threshold 10000

show hostdos

This command displays enabled host security features and their statistics.
Syntax
show hostdos
Mode
Privileged EXEC or Global configuration:
Sample Output
The following example displays a sample host security configuration with statistics:
XSR#show hostdos
LANd Attack (Destination IP = Source IP}
Enabled
10 attacks
Spoofed Address Check
Enabled
0 attacks
16-92 Configuring Security
XSR# or XSR(config)#
XSR# or XSR(config)#