Ip Access List Configuration; Autonomous System Path Configuration - HP GbE2c - Blc Layer 2/3 Fiber SFP Option Command Reference Manual

Table 128 Route Map Configuration Menu options
Command
enable
disable
delete
cur

IP Access List configuration

Command: /cfg/l3/rmap <1-32>/alist <1-8>
[IP Access List 1 Menu]
nwf
metric
action
enable
disable
delete
current
NOTE: This menu is available only on the GbE2c Layer 2/3 Ethernet Blade Switch.
The route map number (1-32) and the access list number (1-8) represent the IP access list you wish to configure. The
following table describes the IP Access List Configuration Menu options.
Table 129 IP Access List Configuration Menu options
Command
nwf <1-256>
metric <1-4294967294>|none
action permit|deny
enable
disable
delete
cur

Autonomous System Path configuration

Command: /cfg/l3/rmap <1-32>/aspath <1-8>
[AS Filter 1 Menu]
as
action
enable
disable
delete
current
NOTE: This menu is available only on the GbE2c Layer 2/3 Ethernet Blade Switch.
Description
Enables the route map.
Disables the route map.
Deletes the route map.
Displays the current route configuration.
- Network Filter number
- Metric
- Set Network Filter action
- Enable Access List
- Disable Access List
- Delete Access List
- Display current Access List configuration
Description
Sets the network filter number.
Sets the metric value in the AS-External (ASE) LSA.
Permits or denies action for the access list.
Enables the access list.
Disables the access list.
Deletes the access list.
Displays the current Access List configuration.
- AS number
- Set AS Filter action
- Enable AS Filter
- Disable AS Filter
- Delete AS Filter
- Display current AS Filter configuration
Configuration Menu 127