Upgrading The Boot Rom Program Through A System Reboot - HP 5800 Series Configuration Manual

Upgrading the boot ROM program through a system
reboot
CAUTION:
To execute the bootrom command successfully, save the Boot ROM file in the root directory of the storage
media on a member device.
To upgrade the Boot ROM program:
Step
1. Enter system view.
2. Enable the validity check
function when upgrading
the Boot ROM.
3. Return to user view.
4. Save the Boot ROM
program to the root
directory of the Flash of
the master device by using
FTP, TFTP, or other
approaches.
5. Upgrade the Boot ROM
program on member
devices.
6. Reboot a specified
member switch or the IRF
virtual device.
Command Remarks
system-view —
Optional.
By default, the validity check function is enabled at
the time of upgrading Boot ROM.
The Boot ROM programs of member devices vary
bootrom-update
with devices, so users are easily confused when
security-check enable
upgrading the Boot ROM.
With the validity check function enabled, the
device can strictly check the Boot ROM upgrade
files for correctness and the version configuration
information to ensure a successful upgrade.
quit —
Required.
—
For more information about FTP or TFTP, see
Fundamentals Configuration Guide.
bootrom update file
Required.
file-url slot
Available in user view.
slot-number-list
The slot keyword specifies a switch by its member
ID of the IRF virtual device. If the keyword is not
reboot [ slot
provided, the IRF virtual device will reboot.
slot-number ]
Available in user view.
126