CD-ROM Drive
CAUTION:
A class 1 laser is contained in the device. Do not attempt to operate the drive
while it is disassembled. Do not attempt to open the covers of the drive as it is
not serviceable and is replaced as a unit.
Removal
1. Turn off power as described in "Powering Off the System" on page 429.
2. If you have not already done so, open the front door of the rack unit.
3. Loosen the two thumbscrews that attach the front bezel to the I/O drawer.
4. Grasp both sides of the front bezel and pull it off the drawer.
5. Push the release lever to the left and pull the CD-ROM drive out.
6. Disconnect the cables from the CD-ROM drive.
7. Remove the screws that connect the carrier to the CD-ROM drive.
Replacement
Replace in reverse order.
462
Service Guide