Table of Contents
Advertisement
Step 1540-34
Replace the adapter or device that is causing the Please Define System Console
screen to not be displayed or all attached devices and adapters to not be listed with a
new adapter.
1. Turn on power and boot standalone diagnostics from CD.
2. If the Please Define System Console screen is displayed, follow directions to select
the system console.
3. Use the Display Configuration and Resource List to list all attached devices and
adapters (refer to the Diagnostics Information for Multiple Bus Systems if
necessary).
4. Check that all attached devices and adapters are listed.
Did the Please define the System Console screen display and are all attached
devices and adapters listed?
NO
YES
134
Service Guide
Go to "Step 1540-35" on page 135.
Reinstall all remaining adapters and reconnect all devices. Return the system
to its original configuration. Go to "Map 0410: Repair Checkout" in the
Diagnostics Information for Multiple Bus Systems .
Advertisement
Table of Contents
