Table of Contents
Advertisement
Step 1540-32
1. If it is not already off, turn off the power.
2. Remove all adapters from slots 10, 11, 12, 13, and 14 that are not attached to the
boot device.
3. Label and record the location of any cables attached to the adapters.
4. Record the slot number of the adapters.
5. Turn on the power to boot standalone diagnostics from CD.
6. When the TTY screen displays Enter 0 to select this console, press the 0 key
on the TTY terminal's keyboard.
7. If the Please Define System Console screen is displayed, follow directions to select
the system console.
8. Use the Display Configuration and Resource List to list all attached devices and
adapters (refer to the Diagnostics Information for Multiple Bus Systems if
necessary).
9. Check that all attached devices and adapters are listed.
Did the Please define the System Console screen display and are all attached
devices and adapters listed?
NO
YES
Step 1540-33
If the Please Define System Console screen does display and all attached devices and
adapters are listed, the problem is with one of the adapter cards or devices that was
removed or disconnected from the I/O drawer.
1. Turn off the power.
2. Replace one adapter or device that was removed. Place the original adapter cards
in their original slots when reinstalling adapters.
3. Turn on the power to boot standalone diagnostics from CD.
4. If the Please Define System Console screen is displayed, follow directions to select
the system console.
5. Use the Display Configuration and Resource List to list all attached devices and
adapters (refer to the Diagnostics Information for Multiple Bus Systems if
necessary).
6. Check that all attached devices and adapters are listed.
Did the Please define the System Console screen display and are all attached
devices and adapters listed?
NO
YES
Go to "Step 1540-35" on page 135.
Go to "Step 1540-33".
Go to "Step 1540-34" on page 134.
Reinstall the next adapter or device and return to number 1 in this step.
Continue repeating this process until an adapter or device causes the Please
Define System Console screen to not be displayed or all attached devices and
adapters to not be listed.
Chapter 3. Maintenance Analysis Procedures
133
Advertisement
Table of Contents
