IBM 7026-H80 - RS/6000 - 256 MB RAM Service Manual page 223

Service guide
Table of Contents

Advertisement

Table 5. Firmware Error Codes. (continued)
Error Code Description
25A8 0xxx NVRAM problems
25A8 0000 Initialization failed, device test failed
25A8 0001 Init-NVRAM invoked, all of NVRAM
initialized
25A8 0002 Init-NVRAM invoked, some data
partitions may have been preserved.
25A8 0011 Data corruption detected, all of
NVRAM initialized
25A8 0012 Data corruption detected, some data
partitions may have been preserved.
25A8 0100 NVRAM data validation check failed.
25A8 0201 Unable to expand target partition -
saving configuration variable.
25A8 0202 Unable to expand target partition -
writing error log entry.
25A8 0203 Unable to expand target partition -
writing VPD data.
25A8 0210 Setenv/$Setenv parameter error -
name contains a null character.
25A8 0211 Setenv/$Setenv parameter error -
value contains a null character.
Action/
Possible Failing FRU
Errors reported against NVRAM can
be caused by low battery voltage and
(more rarely) power outages that
occur during normal system usage.
With the exception of the 25A80000
error, these errors are warnings that
the NVRAM data content had to be
re-established and do not require any
FRU replacement unless the error is
persistent. When one of these errors
occurs, any system customization (for
example, boot device list) information
has been lost, the system may need
to be reconfigured.
If the error is persistent, replace
primary I/O backplane
Location: U0.1-P1
Refer to Action under error code
25A80xxx.
Refer to Action under error code
25A80xxx.
Refer to Action under error code
25A80xxx.
Refer to Action under error code
25A80xxx.
Refer to Action under error code
25A80xxx.
Turn off, turn on system unit and
retry the operation before replacing
any system component.
Refer to Action under error code
25A80xxx.
Refer to Action under error code
25A80xxx.
Refer to Action under error code
25A80xxx.
Refer to Action under error code
25A80xxx.
Refer to Action under error code
25A80xxx.
Refer to Action under error code
25A80xxx.
Chapter 5. Error Code to FRU Index
205

Advertisement

Table of Contents
loading

Table of Contents