IBM 7026-H80 - RS/6000 - 256 MB RAM Service Manual page 211

Table 5. Firmware Error Codes. (continued)
Error Code Description
20EE 0006 No recognized SCSI adapter present
20EE 0007 Keyboard not found
20EE 0008 No configurable adapters were found
in the system by the remote IPL
menu in the SMS utilities
20EE 0009 Unable to communicate with the
service processor
20EE 000B The system was not able to find an
operating system boot record on the
devices listed in the boot list.
This can be caused by the wrong
devices being in the boot list, a
problem that prevents the system
from communicating with the device
that contains the boot record, or the
boot record being corrupted.
Action/
Possible Failing FRU
This warning occurs when the
selected SMS function cannot locate
any SCSI adapter supported by the
function. If a supported SCSI adapter
is installed:
1. Replace SCSI adapter(s).
2. Replace the I/O board in
drawer(s) containing SCSI
adapter(s).
1. Plug in keyboard.
2. Replace primary I/O backplane
Location: U0.1-P1
This warning occurs when the remote
IPL menu in the SMS utilities cannot
locate any LAN adapters that are
supported by the remote IPL function.
If a supported device is installed:
1. Replace the adapter.
2. Replace the I/O drawer planar in
the drawer(s) containing the
adapter.
Replace primary I/O backplane
Location: U0.1-P1
Go to "Boot Problems and Concerns"
on page 159
Chapter 5. Error Code to FRU Index
193