IBM 7026-H80 - RS/6000 - 256 MB RAM Service Manual page 167

Table 2. Firmware Checkpoints (continued)
Checkpoint Description
E152 Probing for adapter FCODE,
evaluate if present
E153 End adapter FCODE,
probe/evaluate
E154 Create PCI bridge node
E155 Probing PCI bridge secondary bus
E156 Create PCI ethernet node
E15A Create 64-bit host (primary) PCI
controller node
E15B Transferring control to Operating
System (service mode boot)
E15C Probe primary 64-bit PCI bus
E15D Create host PCI controller node
E15F Adapter VPD probe
E162 SP node VPD creation
E163 Create CPU VPD
E165 Create planar-clock VPD
E166 Create CEC VPD
E167 Collect power cards VPD.
E170 Start of PCI Bus Probe
E172 First pass PCI device probe
Action/
Possible Failing FRU
Follow the repair action listed for
checkpoint E151.
See the note on page 139.
Follow the repair action listed for
checkpoint E151.
Follow the repair action listed for
checkpoint E151.
Follow the repair action listed for
checkpoint E151.
See the note on page 147.
See "Boot Problems and Concerns"
on page 159.
See the note on page 147.
See the note on page 147.
Follow the repair action listed for
checkpoint E151.
See the note on page 147.
See the note on page 147.
See the note on page 147.
See the note on page 147.
See the note on page 147.
Follow the repair action listed for
checkpoint E151.
Follow the repair action listed for
checkpoint E151.
Chapter 4. Checkpoints
149