IBM 7026-H80 - RS/6000 - 256 MB RAM Service Manual page 276

Table 6. Service Processor Error Codes. (continued)
258
Service Guide
Error Code Description
406D 0331 Attention handler detected memory
DIMM fault
406D 0332 Attention handler detected memory
DIMM fault
406D 033D Attention handler detected memory
DIMM fault
406D 03FF Attention handler detected memory
on processor card fault
406D 3101 Attention handler detected RIO port 0
fault
406D 3102 Attention handler detected RIO port 1
fault
406D 3121 Attention handler detected RIO cable
on port 0 fault
406D 3122 Attention handler detected RIO cable
on port 1 fault
406D 31FF Attention handler detected RIO port
fault
406D 3200 Attention handler detected primary
I/O drawer fault
406D 3201 Attention handler detected primary
I/O backplane fault
406D 3280 Attention handler detected primary
RIO adapter fault
406D 3281 Attention handler detected primary
RIO port 0 fault
406D 3282 Attention handler detected primary
RIO port 1 fault
406D 3283 Attention handler detected primary
RIO ports fault
Action/
Possible Failing FRU
Memory DIMM
Location: U1.1-P1-C1-M5
Memory DIMM
Location: U1.1-P1-C1-M4
Memory DIMM
Location: U1.1-P1-C1-M4 x2
Memory failure on processor card
that cannot be automatically isolated.
Go to "MAP 1540: Minimum
Configuration" on page 113, and run
CEC drawer minimum configuration
for further isolation.
1. Processor card
Location: U1.1-P1-C1
2. CEC drawer backplane
Location: U1.1-P1
1. Processor card
Location: U1.1-P1-C1
2. CEC drawer backplane
Location: U1.1-P1
RIO cable on port 0
Location: U1.1-P1/Q3
RIO cable on port 1
Location: U1.1-P1/Q2
Processor card
Location: U1.1-P1-C1
Go to "MAP 1540: Minimum
Configuration" on page 113.
Primary I/O backplane
Location: U0.1-P1
Primary RIO adapter
Location: U0.1-P1.1
1. Check RIO cable
Location: U0.1-P1.1/Q1
2. Primary RIO adapter
Location: U0.1-P1.1
1. Check RIO cable
Location: U0.1-P1.1/Q2
2. Primary RIO adapter
Location: U0.1-P1.1
Primary RIO adapter
Location: U0.1-P1.1