Table of Contents
Advertisement
Handling Static-Sensitive Devices
Attention:
electricity discharge. These devices are wrapped in antistatic bags to prevent damage
caused by electrostatic discharge.
Take the following precautions:
v If you have an antistatic wrist strap available, use it while handling the device.
v Do not remove the device from the antistatic bag until you are ready to install the
device in the system unit.
v With the device still in its antistatic bag, touch it to a metal frame of the system.
v Grasp cards and boards by the edges. Hold drives by the frame. Avoid touching the
solder joints or pins.
v If you need to lay the device down while it is out of the antistatic bag, lay it on the
antistatic bag. Before picking it up again, touch the antistatic bag and the metal
frame of the system unit at the same time.
v Handle the devices carefully in order to prevent permanent damage.
428
Service Guide
Disk drives, tape drives, and CD-ROM drives are sensitive to static
Advertisement
Table of Contents
