Table of Contents
Advertisement
4. Reconnect the ac power cables (dc power cables in a dc-powered system) to the
CEC drawer.
5. Turn on the power.
Is the error code 1011 1C0x displayed?
NO
YES
Step 1524-8
Have all the cards that were removed in "Step 1524-7" on page 111 been
reinstalled?
NO
YES
112
Service Guide
Go to "Step 1524-8".
The last card you installed is defective. Replace the last card you
installed.This ends the procedure. Go to "MAP 410: Repair Checkout" in the
RS/6000 and Eserver pSeries Diagnostics Information for Multiple Bus
Systems .
Go to "Step 1524-7" on page 111 and reinstall the next card in the list.
Replace the CEC backplane, location: U1.1-P1.
This ends the procedure. Go to "MAP 410: Repair Checkout" in the RS/6000
and Eserver pSeries Diagnostics Information for Multiple Bus Systems .
Advertisement
Table of Contents
