Table of Contents
Advertisement
Table 8. Common Firmware Error Codes (continued)
Scan Log Dump Progress Codes
Table 9. Scan Log Dump Progress Codes
Error Code Description
B1FD 0015 Too many firmware update diskettes
inserted (or wrong or faulty update
image)
B1FD 0016 Diskette read error
B1FD 001A Service processor recovery mode
update fault
B1FD 001E Service processor recovery mode
update fault
B1FD 001F Bad firmware update diskette
Error Code Description
D130 xxxx Scan log dump in progress
Action/
Possible Failing FRU
1. Assure the firmware update
image is correct for the specific
system type and model
2. Replace the update diskettes with
a new set of firmware update
diskettes.
1. The firmware diskette may be
faulty. Try another diskette.
2. Replace the diskette drive.
3. Replace the primary I/O
backplane.
Location: U0.1-P1
Reset service processor (by
activating pinhole reset switch or by
disconnecting, then reconnecting
power)
Wrong firmware update diskette
(Insert correct diskette)
Replace diskette
Action/
Possible Failing FRU
Informational message only. As the
dump progresses, the xxxx
characters in the display will change.
When the scan log dump is
complete, the system may reboot,
depending on the reboot policy
settings.
Chapter 5. Error Code to FRU Index
363
Advertisement
Table of Contents
