Cfm Fault Table - D-Link DGS-3000 Series Reference Manual

The fields that can be configured are described below:
Parameter
Port List
Type
Click the Find button to locate a specific entry based on the information entered.
Click the Clear button to clear all the information entered in the fields.

CFM Fault Table

This window is used to show the MEPs that have faults.
To view this window, click OAM > CFM > CFM Fault Table as shown below:
The fields that can be configured are described below:
Parameter
MD Name
DGS-3000 Series Gigabit Ethernet Switch Web UI Reference Guide
Figure 10-16 CFM Packet Counter Window
Description
Enter a list of ports to be displayed. Select the All Ports check box to display all ports.
Transmit – Selecting this option will display all the CFM packets transmitted.
Receive – Selecting this option will display all the CFM packets received.
CCM – Selecting this option will display all the CCM packets transmitted and received.
Figure 10-17 CFM Fault Table Window
Description
Select and enter the Maintenance Domain name used.
311