Table of Contents
Advertisement
xStack® DGS-3620 Series Managed Switch Web UI Reference Guide
Hours (HH MM SS)
Weekdays
Click the Apply button to accept the changes made. Current configured entries will be displayed in the Time
Range Information table in the bottom half of the window shown above.
Port Group Settings
This window is used to create port groups, and add or delete ports from the port groups.
To view the following window, click System Configuration > Port Group Settings, as show below:
The fields that can be configured are described below:
Parameter
Group Name
Group ID (1-64)
Port List
Action
Click the Apply button to accept the changes made.
Click the Delete button to remove the specific entry.
Time Settings
Users can configure the time settings for the Switch.
To view the following window, click System Configuration > Time Settings, as show below:
The fields that can be configured are described below:
This parameter is used to set the time in the day that this time range is to be enabled
using the following parameters:
Start Time - Use this parameter to identify the starting time of the time range, in hours,
minutes and seconds, based on the 24-hour time system.
End Time - Use this parameter to identify the ending time of the time range, in hours,
minutes and seconds, based on the 24-hour time system.
Use the check boxes to select the corresponding days of the week that this time range
is to be enabled. Tick the Select All Days check box to configure this time range for
every day of the week.
Figure 2-18 Port Group Settings window
Description
Enter the name of a port group.
Enter the ID of a port group
Enter a port or list of ports. Tick the All check box to apply to all ports.
Use the drop-down menu to select Create Port Group, Add Ports or Delete Ports.
Figure 2-19 Time Settings window
22
Advertisement
Table of Contents
