7 supportShow reference
This chapter explains the information displayed by the
following sections:
• supportShow control
• supportShow command
• Proc entry information
supportShow control commands
The
supportShow
Fabric OS and Linux commands. The information displayed by the
controlled by a set of control commands:
supportShowCfgShow
supportShowCfgEnable
supportShowCfgDisable
supportShow command groups
Table 30
displays the command groups under supportshow, and which Fabric OS or Linux commands
are executed by that group.
NOTE:
Many of the commands executed by
commands are not intended for end users.
Table 30
supportShow command groups
Command group
os
exception
commands, page 789
groups, page 789
displayed, page 792
command is used to display support information by executing groups of preselected
Display which groups of commands are enabled to display
under supportShow.
Enable a group of commands to display under
supportShow.
Disable a group of commands from displaying under
supportShow.
Fabric OS 3.2.0
mqshow
i
memShow
mallocshow
fastcheckheap
faultshow
traceshow
errDump
supportShow
supportShow
are intended for support use only. These
supportShow
Fabric OS 4.4.0
mii-tool –vv
/usr/bin/du -xh / |
/bin/sort:
/bin/ps –elfh
/bin/echo /bin/rpm –qa
/bin/cat
/var/log/dmesg
/bin/cat /etc/fstab
/bin/cat /etc/mtab
printing proc entries.
errdump –a/-p
Fabric OS 5.x command reference guide 789
command. This chapter has the
command can be