secNonFcsPasswd
Sets the admin password for non-FCS switches.
Synopsis
secnonfcspasswd
Availability
admin
Description
Use this command to change the admin password on all non-FCS switches in the fabric. This command
can be issued only from the primary FCS switch in secure mode. The changed passwords are persistent
across reboots. All non-FCS switches that join the fabric in the future inherit this new password.
The password must be between 8 and 40 characters long and can consist of any combination of
alphanumeric characters.
This command can be issued only in secure mode and only from the primary FCS switch.
NOTE:
Ensure no non-FCS admin users are logged in when this command is executed; otherwise, users
on non-FCS-switch sessions terminate.
Operands
none
Examples
To set the admin password for all non-FCS switches in the fabric:
switch:admin> secnonfcspasswd
Changing password for admin
Non FCS switch admin password:
Re-type new password:
Login sessions with password changed will be terminated.
Password for non-FCS admin account has been changed successfully.
See also
passwd
secModeDisable
secModeShow
secTempPasswdSet
578 Fabric OS commands