HP StorageWorks 2/64 - Core Switch Command Reference Manual page 741

portnumber
domainnumber
Examples
To display the routing information of all the active ports:
switch:admin> urouteshow
Local Domain ID: 3
In Port
---------------------------------------------------------------------------
0
11
16
27
To display the routing information of port 11 on slot 1:
switch:admin> urouteshow 1/11
Local Domain ID: 3
In Port
----------------------------------------------------------------------------
11
To display the routing information of port 11 to domain 4 only:
switch:admin> urouteshow 1/11, 4
In Port
----------------------------------------------------------------------------
11
See also
portRouteShow
topologyShow
uRouteConfig
uRouteRemove
Specify a port number. Valid values for port number vary,
depending on the switch type. Use
list of valid ports. This operand is optional; if omitted, the
command displays routing information for all input ports in the
switch.
Displays routing information for the specified domain. This
operand is optional; if omitted, the routing information for all
domains in the fabric is displayed.
Domain Out Port
1 11
2 0
4 0
1 27
2 16
4 0
Domain Out Port
2 16
4 16
Local Domain ID: 3
Domain Out Port
4 16
switchShow
Metric Hops Flags
1000 1 D
1500 2 D
500 1 D
1000 1 D
1500 2 D
500 1 D
Metric Hops Flags
1500 2
500 1
Metric Hops Flags
500 1 D
Fabric OS 5.x command reference guide 741
to display a
Next (Dom, Port)
1,0
4,0
4,0
1,1
4,16
4,0
Next (Dom, Port)
D 4,16
D 4,16
Next (Dom, Port)
4,16