secPolicySave
Saves a defined security policy to flash memory on all switches in the fabric.
Synopsis
secpolicysave
Availability
admin
Description
Use this command to save a defined security policy to flash memory of all switches in the fabric.
NOTE:
This command can be issued only from secure mode and only from the primary FCS switch.
Operands
none
Examples
To save new policy set in all switches in the fabric:
switch:admin> secpolicysave
secpolicysave command was completed successfully.
See also
secPolicyAbort
secPolicyActivate
secPolicyAdd
secPolicyCreate
secPolicyDelete
secPolicyDump
secPolicyRemove
secStatsShow
600 Fabric OS commands