Syslogdfacility - HP StorageWorks 2/64 - Core Switch Command Reference Manual
Hp storageworks fabric os 5.x command reference guide (aa-rvhvb-te, september 2005)
Hide thumbs
Also See for StorageWorks 2/64 - Core Switch:
- Reference manual (278 pages) ,
- Installation manual (166 pages) ,
- Administrator's manual (152 pages)
Table of Contents
Advertisement
syslogdFacility
Changes the syslog facility.
Synopsis
syslogdFacility [-l level]
Availability
admin
Description
Use this command to change the syslog facility to LOG_LOCAL0, LOG_LOCAL1, LOG_LOCAL2,
LOG_LOCAL3, LOG_LOCAL4, LOG_LOCAL5, LOG_LOCAL6, or LOG_LOCAL7.
The syslog daemon (syslogd) is a process available on most UNIX systems that reads and forwards
system messages to the appropriate log files or users, depending on the system configuration.
The specified facility is used when forwarding messages to the servers added through the command
syslogdIpAdd. The default facility is LOG_LOCAL7.
Operands
This command has following operand:
-l level
Examples
To set the syslog facility to LOG_LOCAL1:
switch:admin> syslogdFacility -l 1
Syslog facility changed to LOG_LOCAL1
See also
syslogdIpAdd
syslogdIpRemove
syslogdIpShow
Specifies the syslog facility. The range is from 0 through 7. This operand is
optional; if omitted, the current facility is displayed.
Fabric OS 5.x command reference guide 703
Advertisement
Table of Contents
