Supportsave - HP StorageWorks 2/64 - Core Switch Command Reference Manual

supportSave

Saves support information for RASLOG, TRACE, and supportShow.
Synopsis
supportsave [-n] [-c] [-u user_name -p password] -h host_ip -d remote_dir
Availability
admin
Description
Use this command to save RASLOG, TRACE, and
information to a remote FTP location. On a dual-CP system, only the local CP information is saved and
supportShow
enters interactive mode. The following output files are generated:
RASLOG
TRACE
supportShow
Zone log
RCS command log
NS event log
Logs are saved in the specified remote directory.
Also, this command reminds you whether or not a new trace dump needs to be generated manually
before you run supportSave.
Operands
The operands are as follows:
-n
-c
NOTE: The -c operand is mutually exclusive with -u, -p, -h, and -d.
-u user_name
-p password
-h host_ip
-d remote_dir
information is not available on the active CP. If no operands are specified, this command
chassisname-slot-YYYYMMDDHHMM-errDumpAll.ss
chassisname-slot-YYYYMMDDHHMM-tracedump.dmp
chassisname-slot-YYYYMMDDHHMM-supportShow
chassisname-slot-YYYYMMDDHHMM-zone.ss
chassisname-slot-YYYYMMDDHHMM-rcscmd.ss
chassisname-slot-YYYYMMDDHHMM-ns.ss
Does not prompt you for confirmation. This operand is optional; if omitted,
you are prompted for confirmation.
Uses the FTP parameters saved by the command supportFtp. This operand
is optional; if omitted, specify the FTP parameters through command line
options or interactively. To display the current FTP parameters, run
supportFtp
Specifies the user name for the FTP server. This operand is optional; if
omitted, anonymous FTP is used.
Specifies the password for the FTP server. This operand is optional; if omitted,
anonymous FTP is used.
Specifies the IP address for the FTP server.
Specifies the remote directory for the FTP server.
supportShow
(on a dual-CP system, run
Fabric OS 5.x command reference guide 671
information and other support
on the active CP).
supportFtp