Portlogdumpport - HP StorageWorks 2/64 - Core Switch Command Reference Manual

portLogDumpPort

Displays the port log of specified port, without page breaks.
Synopsis
portlogdumpport portid
Availability
all users
Description
Use this command to display the port log of specified port. The command displays all entries in the log
without any page breaks. It is identical to portLogShowPort, except that
the user to press Enter between each page.
Port logs are circular log files in the switch firmware, which can save up to 8,192 entries. See
portLogConfigShow
delete the oldest log entries. Port logs capture switch-to-device, device-to-switch, switch-to-switch, some
device-to-device1, and control information
If the port log is disabled, the following message displays as the first line. See
for more information.
WARNING: port log is disabled
See the HP StorageWorks Fabric OS 5.x procedures user guide for more information.
Operands
This command has the following operand:
portid
Examples
To display the port log dump for a port:
switch:user> portLogDumpPort 14
time
------------------------------------------------------
08:35:27.899
08:35:27.899
08:35:27.916
08:35:28.416
08:35:28.433
08:35:28.433
08:35:28.433
08:35:28.433
08:35:28.433
(continued on next page)
480 Fabric OS commands
to display the current port log size. Once the log is full, the newest log entries
Specify the area number of port to display. If a port area number is
specified, all other ports on the switch are ignored. This operand is
optional.
task event port
tShell pstate 14
tReceive pstate 14
tReceive pstate 14
interrupt scn 14
tFabric ioctl 14
tFabric Tx 14
tReceive Rx 14
tReceive Rx 14
tTransmit Tx 14
cmd args
OL1
LR2
AC
1
90 101d9910,0
164 02fffffd,00fffffd,0005ffff,10000000
0 c0fffffd,00fffffd,00050006
164 03fffffd,00fffffd,00050006,02000000
0 c0fffffd,00fffffd,00050006
prompts
portLogShowPort
command
portLogClear