-ports
itemlist
Examples
To measure line-speed jitter:
switch:admin> spinjitter -ports 1/0 - 1/2
Running SpinJitter .............
One moment please ...Ports Segmented (0)
switchName:
switchType:
switchState:
switchRole:
switchDomain:
switchId:
switchWwn:
switchBeacon:
blade1: Beacon: OFF
blade2: Beacon: OFF
blade3: Beacon: OFF
blade4: Beacon: OFF
Area Slot Port Gbic Speed State
=====================================
0
1
2
(output truncated)
For -lb_mode set to 0,1, the following speed modes are available to test the
speed negotiation.
3
Set all even ports' speed for autonegotiate. Set all odd ports' speed
for 1 Gb/s.
4
Set all even ports' speed for autonegotiate. Set all odd ports' speed
for 2Gb/s.
5
Set all odd ports' speed for autonegotiate. Set all even ports' speed
for 1 Gb/s.
6
Set all odd ports' speed for autonegotiate. Set all even ports' speed
for 2 Gb/s.
For -lb_mode set to 2,3, the following speed modes are available to test FIFO
underrun.
3,5
Set all even ports' speed for 2 Gb/s. Set all odd ports' speed for 1
Gb/s.
4,6
Set all even ports' speed for 1 Gb/s. Set all odd ports' speed for 2
Gb/s.
Specifies a list of user ports to test. By default, all the user ports in the specified
slot (--slot) will be used. See
SW12000A
10.1
Offline
Disabled
1 (unconfirmed)
fffc01
10:00:00:60:69:80:03:0c
OFF
1
0
id
2G
1
1
id
2G
1
2
id
2G
itemList
Online
Testing
......
Online
Testing
......
Online
Testing
......
Fabric OS 5.x command reference guide 655
for further details.