HP StorageWorks 2/64 - Core Switch Command Reference Manual page 646
Hp storageworks fabric os 5.x command reference guide (aa-rvhvb-te, september 2005)
Hide thumbs
Also See for StorageWorks 2/64 - Core Switch:
- Reference manual (278 pages) ,
- Installation manual (166 pages) ,
- Administrator's manual (152 pages)
Table of Contents
Advertisement
To change the systemGroup configuration to the default:
switch:admin> snmpconfig --default systemGroup
*****
This command will reset the agent's system group configuration back
to factory default
*****
*****
Are you sure? (yes, y, no, n): [no] y
See also
agtCfgDefault
agtCfgSet
agtCfgShow
snmpMibCapSet
snmpMibCapShow
SW_v5_x.mib, Switch Management Information & Switch Enterprise Specific Trap
RFC1157, A Simple Network Management Protocol (SNMPv1)
RFC1213, Management information Base for Network Management of TCP/IP-based internets: MIB-II
RFC2574, User-based Security Model (USM) for version 3 of the Simple Network Management Protocol
(SNMPv3)
646 Fabric OS commands
sysDescr = Fibre Channel Switch
sysLocation = End User Premise
sysContact = Field Support
authTraps = 0 (OFF)
Advertisement
Table of Contents
