fanEnable
Enables a fan unit.
Synopsis
fanenable unit
Availability
admin
Description
Use this command to return the fan unit to the default RPM speed (only if the fan unit has been previously
disabled using the
NOTE:
This command is not available on nonbladed systems except for the StorageWorks SAN
Switch 4/32.
Operands
This command has the following operand:
unit
Examples
To enable a fan unit:
switch:admin> fanenable 1
Fan unit 1 has been enabled
See also
fanDisable
fanShow
command).
fanDisable
Specify the fan's unit number to enable. View the fan unit
numbers using the
required.
command. This operand is
fanShow
Fabric OS 5.x command reference guide 199