Diagdisablepost - HP StorageWorks 2/64 - Core Switch Command Reference Manual
Hp storageworks fabric os 5.x command reference guide (aa-rvhvb-te, september 2005)
Hide thumbs
Also See for StorageWorks 2/64 - Core Switch:
- Reference manual (278 pages) ,
- Installation manual (166 pages) ,
- Administrator's manual (152 pages)
Table of Contents
Advertisement
diagDisablePost
Disables power-on self-test (POST).
Synopsis
diagdisablepost
Availability
admin
Description
Use this command to disable POST. A reboot is not required for this command to take effect.
NOTE:
This command disables POST on both Core Switch 2/64 logical switches.
Operands
none
Examples
To disable the POST during future powerons:
switch:admin> diagdisablepost
Config update Succeeded
Diagnostic POST is now disabled.
See also
diagEnablePost
142 Fabric OS commands
Advertisement
Table of Contents
