Cfgcreate - HP StorageWorks 2/64 - Core Switch Command Reference Manual

cfgCreate

Creates a zone configuration.
Synopsis
cfgcreate "cfgName", "member; member"
Availability
admin
NOTE: This command requires HP Advanced Zoning, which is included within the Base Configuration
Services and bundled with each B-series switch.
Description
Use this command to create a new zone configuration.
A zone configuration name must begin with a letter that can be followed by any number of letters,
numbers, and underscores. Names are case sensitive: for example, "Cfg_1" and "cfg_1" are different
zone configurations. Blank spaces are ignored.
The zone configuration member list must have at least one member. Empty member lists are not allowed.
This command changes the defined configuration. For the change to be preserved across switch reboots, it
must be saved to flash memory using the
appropriate zone configuration must be enabled using the
See the
zoneCreate
NOTE: When security is enabled, this command can be issued only from the primary FCS switch.
Operands
This command has the following required operands:
cfgName
member
Examples
To create a configuration containing three zones:
switch:admin> cfgcreate "USA_cfg", "Red_zone; Blue_zone; Green_zone"
cfgSave
command for more information on name and member specifications.
Specify a name for the zone configuration, in quotation marks.
Specify a zone member or list of zone members to be added to
the configuration, in quotation marks and separated by
semicolons. Members can be specified in one or more of the
following ways:
• Zone names
• QuickLoop names
• FA (Fabric Assist) zone names
command. For the change to become effective, an
command.
cfgEnable
Fabric OS 5.x command reference guide 83