Portcfggport - HP StorageWorks 2/64 - Core Switch Command Reference Manual

portCfgGPort

Designates a port as a G_Port.
Synopsis
portcfggport [slotnumber/]portnumber, mode
Availability
admin
Description
Use this command to designate a port as a G_Port. After this is done, the switch attempts to initialize that
port as an F_Port only, and does not attempt loop initialization (FL_Port) on the port. A port designated as
a G_Port can become an E_Port.
Changes made by this command are persistent across switch reboots or power cycles.
Operands
This command has the following operands:
slotnumber
portnumber
mode
Examples
To configure a port as a locked G_Port:
switch:admin> portcfggport 1/3, 1
See also
configure
portCfgLPort
portShow
switchShow
450 Fabric OS commands
For bladed systems only, specify the slot number of the port to be
configured, followed by a slash (/).
Specify the number of the port to be configured, relative to its
slot for bladed systems. Use
valid ports.
Specify a value of 1 to designate the port as a G_Port or specify
a value of 0 to remove the G_Port designation from the port. A
value of 0 is the default port state. This operand is required.
to display a list of
switchShow