Aaaconfig - HP StorageWorks 2/64 - Core Switch Command Reference Manual

aaaConfig

Manages RADIUS configuration information.
Synopsis
aaaconfig [action] [options]
Availability
admin
Description
Use this command to manage the RADIUS configuration for the authentication, authorization, and
accounting (AAA) services. This command displays, adds, removes, changes, enables, or disables
RADIUS configuration.
When the command completes, any new configuration is saved persistently. It is effective for the next
AAA request. The configuration applies to all switch instances in a platform supporting multiple switch
domains.
Use the centralized RADIUS servers to manage AAA services for a switch, as defined in RFC 2865.
NOTE: This command can be executed when you are logged in through the console, or a serial or SSH
connection.
Operands
The command takes as input an action and its associated options. Without any specified action, the
command displays the usage. Specify action as one of following:
--show
--add server [options]
--remove server
--change server [options]
--move server to_position
--radius [on | off]
--switchdb [on | off]
The following are the options for the --add and --change actions:
-p port
-s secret
-t timeout
-a [pap | chap]
22 Fabric OS commands
Displays the current AAA service configuration.
Adds a RADIUS server to the configuration.
Removes a RADIUS server from the configuration.
Changes a RADIUS server configuration.
Moves a RADIUS server from the current position to a new
position. When server is a required operand for an action, it
must be either an IP address or a name in dot notation. If a
name is used, DNS must be properly configured.
Turns on or off the current RADIUS configuration.
Turns on or off the switch local database as secondary
authentication.
RADIUS server port number
Common secret between the switch and RADIUS server
Response timeout for the RADIUS server
Use PAP or CHAP as authentication protocol