Switchshutdown - HP StorageWorks 2/64 - Core Switch Command Reference Manual
Hp storageworks fabric os 5.x command reference guide (aa-rvhvb-te, september 2005)
Hide thumbs
Also See for StorageWorks 2/64 - Core Switch:
- Reference manual (278 pages) ,
- Installation manual (166 pages) ,
- Administrator's manual (152 pages)
Table of Contents
Advertisement
switchShutdown
Halts the operational switch.
Synopsis
switchshutdown
Availability
admin
Description
Use this command to halt switch operation on one switch without disrupting the other. This command
disables a logical switch in a dual-switch chassis.
This command has to be used in combination with switchStart.
This command halts all the daemons associated with the switch, frees the resources and object states
associated with the switch to a clear state, and disables all the ports and blades associated with the
switch.
NOTE:
This command is not supported on single-domain systems.
Operands
none
Examples
To halt the operational switch:
switch:admin> switchshutdown
Stopping all switch daemons...Done.
Powering off slot 1...Done.
Powering off slot 4...Done.
Checking all slots are powered off...Done.
Cleaning up kernel modules...Done.
See also
switchReboot
switchStart
694 Fabric OS commands
Advertisement
Table of Contents
