Tracetrig - HP StorageWorks 2/64 - Core Switch Command Reference Manual

traceTrig

Sets, removes, or displays trace triggers.
Synopsis
tracetrig [-S] [-s slot]
tracetrig -a [-s slot] msgid
tracetrig -r [-s slot] msgid
tracetrig -R [-s slot]
Availability
admin
Description
Use this command to set, remove, or display trace triggers for the specified slot on the switch.
NOTE: If there is no parameter specified, this command defaults to tracetrig -S.
Operands
This command has the following mutually exclusive operands:
-S
-a
-r
-R
-This command has the following optional operand:
-s slot
The -a and -r options also have the following required operand:
msgid
Examples
To set a trace trigger:
switch:admin> tracetrig -a NS-1001
trace trigger[NS-1001] is added
To remove a trace trigger:
switch:admin> tracetrig -r NS-1001
trace trigger[NS-1001] is removed
718 Fabric OS commands
Displays trace triggers for the specified slot.
Sets a trace trigger for the specified slot.
Removes a trace trigger from the specified slot.
Removes all trace triggers from the specified slot.
Specifies the slot number from which a trace dump is generated. If this
is not supplied, the trace dump is generated from the local slot.
Specifies the trigger number, using the RASLog message ID. This
operand is required.