HP StorageWorks 2/64 - Core Switch Command Reference Manual page 515

Operands
This command has the following operands:
slotnumber
portnumber
Examples
To display the 64-bit hardware statistics for a port:
switch:user> portstats64show 4/15
stat64_wtx
stat64_wrx
stat64_ftx
stat64_frx
stat64_c2_frx
stat64_c3_frx
stat64_lc_rx
stat64_mc_rx
stat64_mc_to
stat64_mc_tx
tim64_rdy_pri
tim64_txcrd_z
er64_enc_in
(continued on next page)
For bladed systems only, specify the slot number of the port to be
configured, followed by a slash (/).
Specify a port number to be configured, relative to its slot for bladed
systems. Use
switchShow
0 top_int : 4-byte words transmitted
316 bottom_int : 4-byte words transmitted
0 top_int : 4-byte words received
1486 bottom_int : 4-byte words receive
0 top_int : Frames transmitted
69 bottom_int : Frames transmitted
0 top_int : Frames received
73 bottom_int : Frames received
0 top_int : Class 2 frames received
0 bottom_int : Class 2 frames received
0 top_int : Class 3 frames received
37 bottom_int : Class 3 frames received
0 top_int : Link control frames received
8 bottom_int : Link control frames received
0 top_int : Multicast frames received
0 bottom_int : Multicast frames received
0 top_int : Multicast timeouts
0 bottom_int : Multicast timeouts
0 top_int : Multicast frames transmitted
0 bottom_int : Multicast frames transmitted
0 top_int : Time R_RDY high priority
60438254 bottom_int : Time R_RDY high priority
0 top_int : Time BB_credit zero
2 bottom_int : Time BB_credit zero
0 top_int : Encoding errors inside of frames
0 bottom_int : Encoding errors inside of frames
to display a list of valid ports.
Fabric OS 5.x command reference guide 515