HP StorageWorks 2/64 - Core Switch Command Reference Manual page 180

Flags
nbrWWN
nbrPort
lr_tid
red_ports
Operands
This command has the following operands:
slotnumber
portnumber
180 Fabric OS commands
Port flags:
0x00000001 Slave connection
0x00000002 Loopback connection
0x00000004 Incompatible connection
0x00000008 Overlapping domains
0x00000010 Overlapping zones
0x00000020 Done PTIO ioctl
0x00000040 Sent an RJT to ELP
0x00000080 BF received from the port
0x00000200 Segmented by routing code
0x00000800 Zoning has completed
0x00001000 Segmented by Platform Management
0x00002000 Segmented due to no license
0x00004000 Segmented due to E_Port disabling
0x00008000 DIA already sent for that port
0x00010000 RDI already sent
0x00020000 Port is true T port
0x00040000 Port received an ELP
0x00080000 Port received an ELP RJT
0x00100000 LR pending due to ELP RJT rcv
0x00200000 Received a DIA on this port
0x00400000 Port is the EMT Initiator
0x00800000 Security violation
0x01000000 Security incompatibility
0x02000000 Rcv a DIA ACC
0x040000000 Port is security authenticating
0x080000000 ECP RJT or retires exceeded
0x100000000 Segmented due to duplicated WWN
0x200000000 Segmented due to E_Port isolation
Neighboring switch's WWN
Neighboring switch's port
Link reset timer identifier and current state.
All E_Ports that are connected to the same neighboring switch
For bladed systems only, specifies the slot number of the port to
display, followed by a slash (/).
Specifies the port number to display, relative to its slot for
bladed systems. Use to list valid ports.
switchShow