Nbrstatsclear - HP StorageWorks 2/64 - Core Switch Command Reference Manual

nbrStatsClear

Resets FSPF interface counters.
Synopsis
nbrstatsclear [slotnumber/][portnumber]
Availability
admin
Description
Use this command to reset the counters of FSPF frames transmitted and received on each inter-switch link
(ISL) or a specific ISL. These counters display using the using the
Use this command without operands to reset counters on all interfaces.
Operands
This command has the following operands:
slotnumber
portnumber
When this command is specified with no operand, the statistics are cleared for all interfaces.
Examples
To reset the counters on a port:
switch:admin> interfaceshow 1/0
idbP
Interface 0 data structure:
nghbP
ifNo
masterPort
defaultCost
cost
delay
(continued on next page)
362 Fabric OS commands
For bladed systems only, specify the slot number of the port to display,
followed by a slash (/).
Specify the port number to display, relative to its slot for bladed systems.
Use to list valid ports. This operand is optional; if omitted,
switchShow
FSPF statistics are reset.
= 0x10050a38
= 0x1004ce68
= 0
= 0 (self)
= 500
= 500
= 1
command.
interfaceShow