Pdshow - HP StorageWorks 2/64 - Core Switch Command Reference Manual

pdShow

Displays data from a panic dump file.
Synopsis
pdshow [panic-dump-file]
Availability
admin
Description
Use this command to display data from a panic dump file. The panic dump file contains information that
might be useful to determine the cause of the system panic.
When executed without any arguments, this command displays output from the latest panic dump file
available on the switch.
If a panic dump file is specified as an argument, the contents of that specific file are displayed.
Operands
This command has the following operand:
panic-dump-file
Examples
To examine a panic dump file by the name panic_dump located under the directory /tmp:
switch:admin> pdshow /tmp/panic_dump
* Host
* PLATFORM got from pd file is: 'SW12000'
* Some results shown may be incorrect and/or missing
* It is best if this command is run on same PLATFORM as that of pdfile
_______________________********________________________
* File
* SECTION:PD_MISC
-----------------------********------------------------
WatchDogRegister=0x0
Section=Startup time: Tue Dec
Kernel=
Fabric OS=
Made on=
Flash=
BootProm=
Section=HA show Output
(output truncated)
Specify the full path name of a panic dump file. This operand is
optional.
*** CAUTION ***
PLATFORM (current) is: 'Unknown'
**************
:/core_files/panic/core.pd1038932352
3 16:06:11 UTC 2002
2.4.19
v4.1.0_j_dist_1103
Tue Dec 3 19:07:13 2002
Tue Dec 3 13:19:06 2002
3.2.0
*
*
Fabric OS 5.x command reference guide 393