Ficoncupshow - HP StorageWorks 2/64 - Core Switch Command Reference Manual

ficoncupshow

Displays FICON-CUP parameters for a switch.
Synopsis
ficoncupshow fmsmode
ficoncupshow modereg [bitname]
Availability
all users
Description
Use this command to display FICON-CUP (Control Unit Port) parameters for a switch.
Operands
The following operands are supported:
fmsmode
modereg
Examples
To display FMS mode for the switch:
switch:user> ficoncupshow fmsmode
fmsmode for the switch: Enabled
To display mode register for the switch:
switch:user> ficoncupshow modereg
POSC
------------------------------
1
226 Fabric OS commands
Display the FICON Management Server (FMS) mode for the switch.
Display the FICON-CUP mode register. When parameter is modereg,
one of the following arguments can be specified as bitname:
POSC
UAM
ASM
DCAM
ACP
HCP
If no argument is specified, all the mode register bits are displayed. If a
mode register bit is specified, then only the value of that bit is displayed.
A value of 1 indicates that a given mode register bit is set, and 0
indicates that it is not set.
UAM ASM DCAM ACP
0 1 1 1
Programmed offline state control
User alert mode
Active=saved mode
Director clock alert mode
Alternate control prohibited
Host control prohibited
HCP
0