HP StorageWorks 2/64 - Core Switch Command Reference Manual page 778

Table 28 switchAdmin commands (continued)
Command
chassisShow
chipRegShow
cmemRetentionTest
cmiTest
configShow
configDownload
configUpload
configure
dataTypeShow
date
dbgShow
diagHelp
dlsReset
dlsSet
dlsShow
dnsConfig
enclosureShow
errClear
errDelimiterSet
errDump
errModuleShow
errShow
exit
fabPortShow
fabRetryShow
fabricLog
778 MUA-based roles
Description
Displays all field replaceable units (FRUs).
Displays the port registers for a given chip number.
Tests the data retention of the central memory SRAMs.
Verifies the control message interface (CMI) bus between ASICs.
Displays system configuration settings.
Downloads a switch configuration file from a host file, omitting zoning
and security configurations.
Uploads the switch configuration file to a host file.
Modifies system configuration parameters.
Displays sample data stream types used in some diagnostic commands.
Displays or sets the switch date and time.
Displays current values of debug and verbosity levels of the specified
module.
Displays diagnostic command information.
Disables the dynamic load sharing (DLS) option.
Enables the dynamic load sharing (DLS) option.
Display the setting of the dynamic load sharing (DLS) option.
Sets or displays domain name service (DNS) parameters.
Displays attributes of the switch enclosure.
Clears all error log messages for all switch instances on this control
processor (CP).
Sets the error log start and end delimiter for messages sent to the
console and syslog.
Displays the error log, without pagination.
Displays all the defined error log modules.
Displays the error log messages, with pagination.
Logs out from a shell session.
Displays fabric port information.
Displays the retry count of the fabric commands.
Displays or manipulates the fabric log.