nbrStateShow
Displays FSPF neighbor's state.
Synopsis
nbrstateshow [slotnumber/][portnumber]
Availability
all users
Description
Use this command to display information about neighbors to the local switch, or information about a
specific neighbor if a port number is supplied. FSPF defines a neighbor as a remote E_Port interface that
is directly attached to the local switch. The following fields display:
Local Domain ID
Local Port
Domain
Remote Port
State
Operands
This command has the following optional operands:
slotnumber
portnumber
Examples
To display information about switches directly connected to the local switch:
switch:user> nbrstateshow 2/0
Local Domain ID: 1
Local Port
-------------------------------------------------------
16
See also
interfaceShow
Domain number of local switch.
E_Port (interface) on local switch.
Domain number of remote switch.
E_Port (interface) on remote switch.
State of the neighbor. The E_Port is used to route frames
only if the neighbor is in NB_ST_FULL state.
For bladed systems only, specify the slot number of the port to display,
followed by a slash (/).
Specify the port number to display, relative to its slot for bladed systems.
Use
to list valid ports. If this operand is omitted, all
switchShow
neighbor states are displayed.
Domain
Remote Port
2
48
State
NB_ST_FULL
Fabric OS 5.x command reference guide 361